Table of Contents
Your air conditioner does more than simply cool your home. It can also reduce indoor humidity and filter harmful contaminants out of the air.
AC Not Turning On
If your AC isn’t turning on, there are a few causes that could be to blame. Typically, this happens because of a tripped circuit breaker, thermostat settings, or power issues. By performing some simple AC troubleshooting, you can figure out the underlying cause. For professional help, consider reaching out to Elkhorn Heating & Air Conditioning, Inc., a trusted provider of HVAC services.
Check the Thermostat
First, check your thermostat. It should be in cool mode. Make sure the room temperature is set appropriately. You can use your manufacturer’s guide to reset the thermostat if it still isn’t working. Additionally, try cleaning off the sensor so that it can get an accurate reading.
Inspect the Circuit Breaker
If the circuit breaker is tripped, your AC may stop blowing cold air. Check to see if any breakers have tripped on the breaker panel. Then, try resetting them. If it immediately trips again, get professional heating, ventilation, and air conditioning (HVAC) help because there may be an underlying electrical issue.
Examine the Power Source
Next, make sure your unit is plugged in and receiving power. This type of problem is more common with wall units and portable ACs because family members often unplug them to use other appliances or electronic devices.
Poor Airflow from Vents
Airflow issues are among the most common air conditioning problems. Without proper airflow from your vents, your home cannot cool down efficiently. To see if this is the problem, check the vents in each room to see if enough airflow is coming out. If not, one of the following air conditioning problems could be to blame.
Dirty Air Filters
Clogged air filters are one of the most common HVAC issues. In fact, replacing a dirty air filter can improve your energy efficiency by 5% to 15%.
Each manufacturer has different rules, but you generally need to clean or change your air filters every 30 to 90 days. If you wait too long, the clogged air filter prevents airflow from passing through your unit. Eventually, the dust and dirt will get onto your evaporator coil and cause it to become less efficient.
Blocked Vents
While blocked vents are another one of the most common air conditioning problems, this issue is relatively easy to fix. From time to time, take a walk around your home to look at your vents. Move any furniture, clothes, or toys that are blocking them.
Ductwork Issues
Sometimes, ducts can develop leaks. When this happens, airflow escapes inside your walls, ceiling, or floor instead of reaching your rooms. If you find ductwork leaks, you should get them sealed up.
AC Blowing Warm Air
If your AC isn’t blowing cold air anymore, there may be a few reasons why.
Low Refrigerant Levels
One of the best home cooling tips is to get your refrigerant levels checked by a professional. If you have low refrigerant, an HVAC technician can recharge it for you.
Thermostat Settings
Warm air can happen if your AC is set to fan mode. It can also occur if your thermostat settings are at a higher temperature than normal.
Dirty Condenser Coils
When the condenser coils are dirty, it reduces your air conditioner’s efficiency. While it’s possible to clean them with a hose, you’ll need to turn the AC off first and make sure you don’t touch the delicate, sharp fins.
Strange Noises from the AC Unit
Sometimes, you can figure out what type of AC repair solutions you need by the sounds your air conditioner is making.
- Banging or Clanging: A banging or clanging noise is typically a sign of a broken motor or loose parts. Both of these issues should be fixed by an HVAC technician.
- Hissing: This kind of noise often indicates a refrigerant leak, which should be diagnosed and repaired by a professional.
- Clicking: If your AC is clicking more than normal, it could indicate a faulty capacitor.
- Buzzing: Buzzing noises often indicate electrical problems. An electrical issue can potentially be a fire hazard, so it’s important to get this problem fixed quickly.
- Popping: If popping noises occur when your AC starts, it’s likely because of the joints on your ductwork. Get your ductwork inspected to make sure you don’t have any leaks.
Water Leaks Around the Unit
Water leaks around your AC unit are never a good sign. This issue can stem from several underlying HVAC issues.
Clogged Drain Line
If your drain line is clogged, water can leak out and overflow your drain pan. This HVAC problem can be quickly remedied by using a dry or wet vacuum to clean out the drain line.
Frozen Evaporator Coils
When the evaporator coils are frozen, the melting ice can cause puddles to form. Often, this issue stems from airflow problems, low refrigerant, or malfunctioning components like txv valves, which help regulate refrigerant flow in the system.
Get Help for Common AC Issues
If you don’t get them repaired promptly, many air conditioning problems will become worse over time. At the very least, they’ll lead to higher energy bills. Through the help of an AC repair contractor, you can prevent long-term damage and solve common air conditioning problems quickly.

